RRB ALP Previous Year Question Paper Mechanic Motor Vehicle part-b 75 Q&A iti trade
To
speed up the railway exam preparations for the RRB ALP cbt-2 Part-B
Exam, the candidates/students/Railway Aspirants must revise the RRB Assistant loco pilot Previous
Year Question Papers, as these papers help in a better understanding of
the exam question format and to self-analyses their strong and weak
topics. Practicing the RRB ALP Previous Year Question Papers diesel mechanic trade must be
included in the exam preparations to achieve substantial improvement to
score better marks in the Railways ALP Examinations. Attempting RRB ALP
Previous Year Papers for Computer based test stage-II PART-B exams would lessen the chances of
any mistakes or errors while solving the exam questions in the real
exam. Railway recruitment board Previous Year Question Papers for Assistant loco pilot (ALP).
RRB
ALP 2nd Stage CBT Question forMechanic Motor Vehicle mechanic (CEN-01/2025) by railway life.
CBT-II Date - 28.07.2026, Time – 09:30 to 11:00PM (Shift-I)
TOTAL QUESTION–75 CBT-2 PART-B, I.T.I TRADE– Mechanic Motor Vehicle mechanic in Electronic and allied group syllabus railway stage 2 exam.
Q.1 What happens to the vehicle's rear ride height when the rubber air cylinder is pressurized in a load-adjustable shock absorber?
लोड-एडजस्टेबल शॉक एब्जॉर्बर में रबर एयर सिलेंडर को प्रेसराइज करने पर वाहन की पीछे की ऊँचाई (Rear Ride Height) पर क्या प्रभाव पड़ता है?
A) The rear ride height remains unchanged / पीछे की ऊँचाई अपरिवर्तित रहती है B) The rear ride height increases / पीछे की ऊँचाई बढ़ जाती है C) The rear ride height becomes uneven side to side / पीछे की ऊँचाई एक तरफ अधिक और दूसरी तरफ कम हो जाती है D) The rear ride height decreases / पीछे की ऊँचाई कम हो जाती है
Answer: B) The rear ride height increases / पीछे की ऊँचाई बढ़ जाती है
Description:
When air pressure is supplied to the rubber air cylinder, it provides additional lifting force to support the vehicle load. This raises the rear suspension height and improves vehicle stability.
हिंदी में:
जब रबर एयर सिलेंडर में हवा का दबाव बढ़ाया जाता है, तो यह वाहन के भार को सहारा देने के लिए अतिरिक्त बल उत्पन्न करता है। इससे वाहन की पीछे की ऊँचाई बढ़ जाती है तथा स्थिरता में सुधार होता है।
Q.2 A failure analysis shows a big-end bearing with excessive scoring and shaft damage. Which property was likely insufficient in the bearing material?
फेल्योर विश्लेषण में बिग-एंड बेयरिंग पर अत्यधिक स्कोरिंग और शाफ्ट क्षति पाई गई। बेयरिंग सामग्री का कौन-सा गुण संभवतः अपर्याप्त था?
A) High hardness of the bearing / बेयरिंग की उच्च कठोरता B) Good thermal conductivity / अच्छी तापीय चालकता C) High tensile strength of the bearing / बेयरिंग की उच्च तन्य शक्ति D) Embeddability of the bearing material / बेयरिंग सामग्री की एम्बेडेबिलिटी
Answer: D) Embeddability of the bearing material / बेयरिंग सामग्री की एम्बेडेबिलिटी
Description:
Embeddability allows small dirt or metal particles to become embedded in the bearing surface instead of scratching the shaft. Poor embeddability can cause scoring and shaft damage.
हिंदी में:
एम्बेडेबिलिटी वह गुण है जिसके कारण छोटे धातु या धूल कण बेयरिंग की सतह में समा जाते हैं और शाफ्ट को नुकसान नहीं पहुंचाते। इसकी कमी से स्कोरिंग और शाफ्ट क्षति हो सकती है।
Q.3 Which warning sign on the dashboard may indicate a seat belt pretensioner issue?
डैशबोर्ड पर कौन-सा चेतावनी संकेत सीट बेल्ट प्रीटेंशनर की समस्या का संकेत दे सकता है?
A) A headlight warning flashes / हेडलाइट चेतावनी चमकती है B) A seat belt warning light remains on / सीट बेल्ट चेतावनी लाइट लगातार जलती रहती है C) An air conditioning warning appears / एयर कंडीशनर चेतावनी दिखाई देती है D) A radio warning message is shown / रेडियो चेतावनी संदेश दिखाई देता है
Answer: B) A seat belt warning light remains on / सीट बेल्ट चेतावनी लाइट लगातार जलती रहती है
Description:
A continuously illuminated seat belt warning lamp may indicate a fault in the seat belt pretensioner system or related safety circuitry.
हिंदी में:
यदि सीट बेल्ट चेतावनी लाइट लगातार जलती रहे, तो यह सीट बेल्ट प्रीटेंशनर या उससे जुड़े सुरक्षा सिस्टम में खराबी का संकेत हो सकता है।
Q.4 Under what condition will the shift valve delay a gear shift in automatic transmission?
ऑटोमैटिक ट्रांसमिशन में शिफ्ट वाल्व किस स्थिति में गियर बदलने में देरी करेगा?
A) If the vehicle is accelerating gently / यदि वाहन धीरे-धीरे गति बढ़ा रहा हो B) If the vehicle is accelerating quickly / यदि वाहन तेजी से गति बढ़ा रहा हो C) If the vehicle is in idling state / यदि वाहन आइडल अवस्था में हो D) If the vehicle is braking heavily / यदि वाहन जोर से ब्रेक लगा रहा हो
Answer: B) If the vehicle is accelerating quickly / यदि वाहन तेजी से गति बढ़ा रहा हो
Description:
During rapid acceleration, the shift valve delays gear shifting so that the engine can remain in a higher power range and provide better performance.
हिंदी में:
तेजी से एक्सेलेरेशन के दौरान शिफ्ट वाल्व गियर बदलने में देरी करता है ताकि इंजन अधिक शक्ति वाले RPM रेंज में बना रहे और बेहतर प्रदर्शन दे सके।
Q.5 Which tool is most appropriate for checking battery terminal tightness during routine automobile maintenance?
वाहन के नियमित रखरखाव के दौरान बैटरी टर्मिनल की कसावट जांचने के लिए कौन-सा उपकरण सबसे उपयुक्त है?
A) A spanner of correct size / सही आकार का स्पैनर B) A clean paintbrush / साफ पेंट ब्रश C) A rubber head hammer / रबर हेड हथौड़ा D) A flathead screwdriver / फ्लैटहेड स्क्रूड्राइवर
Answer: A) A spanner of correct size / सही आकार का स्पैनर
Description:
A correctly sized spanner allows safe and proper checking or tightening of battery terminal connections without damaging them.
हिंदी में:
सही आकार का स्पैनर बैटरी टर्मिनलों की कसावट को सुरक्षित रूप से जांचने और आवश्यकतानुसार कसने के लिए सबसे उपयुक्त उपकरण है।
Q.6 An engine consumes excessive oil and oil is found in the combustion chamber. What action should be taken?
यदि इंजन अत्यधिक तेल खा रहा है और दहन कक्ष (Combustion Chamber) में तेल पाया जाता है, तो क्या कार्रवाई की जानी चाहिए?
A) Remove excess oil / अतिरिक्त तेल निकाल दें B) Replace the piston rings / पिस्टन रिंग्स को बदलें C) Replace the main bearings / मुख्य बेयरिंग बदलें D) Use oil of higher viscosity / अधिक विस्कोसिटी वाला तेल उपयोग करें
Answer: B) Replace the piston rings / पिस्टन रिंग्स को बदलें
Description:
Worn or damaged piston rings allow engine oil to enter the combustion chamber, causing excessive oil consumption and smoke. Replacing the piston rings restores proper sealing.
हिंदी में:
घिसी हुई या क्षतिग्रस्त पिस्टन रिंग्स इंजन ऑयल को दहन कक्ष में जाने देती हैं, जिससे तेल की खपत बढ़ जाती है और धुआँ निकलता है। पिस्टन रिंग्स बदलने से यह समस्या दूर हो जाती है।
Q.7 What is the standard figure to represent a shaft in a cross-sectional engineering drawing?
क्रॉस-सेक्शनल इंजीनियरिंग ड्राइंग में शाफ्ट को दर्शाने के लिए मानक आकृति कौन-सी है?
A) Rectangle / आयत B) Circle / वृत्त C) Square / वर्ग D) Triangle / त्रिभुज
Answer: B) Circle / वृत्त
Description:
A shaft is generally cylindrical in shape. Therefore, when viewed in cross-section, it is represented by a circle in engineering drawings.
हिंदी में:
शाफ्ट सामान्यतः बेलनाकार (Cylindrical) होती है, इसलिए उसके क्रॉस-सेक्शन को इंजीनियरिंग ड्राइंग में वृत्त (Circle) द्वारा दर्शाया जाता है।
Q.8 When performing alternator maintenance, you replace a component that connects the rotor to the external circuit. Which part is this?
अल्टरनेटर के रखरखाव के दौरान आप उस भाग को बदलते हैं जो रोटर को बाहरी सर्किट से जोड़ता है। यह कौन-सा भाग है?
A) Stator winding / स्टेटर वाइंडिंग B) Rectifier assembly / रेक्टिफायर असेंबली C) Voltage regulator / वोल्टेज रेगुलेटर D) Slip rings / स्लिप रिंग्स
Answer: D) Slip rings / स्लिप रिंग्स
Description:
Slip rings provide electrical connection between the rotating rotor winding and the stationary external circuit through carbon brushes.
हिंदी में:
स्लिप रिंग्स कार्बन ब्रश की सहायता से घूमते हुए रोटर और स्थिर बाहरी सर्किट के बीच विद्युत संपर्क स्थापित करती हैं।
Q.9 A technician measures only the outside diameter of a rim. What mistake has been made in defining the rim size?
एक तकनीशियन ने केवल रिम का बाहरी व्यास (Outside Diameter) मापा। रिम का आकार निर्धारित करने में क्या गलती हुई है?
A) Measured the inner circumference / आंतरिक परिधि मापी B) Used tyre sidewall measurement / टायर साइडवॉल का माप लिया C) Omitted the width of the rim / रिम की चौड़ाई को शामिल नहीं किया D) Included tread depth only / केवल ट्रेड गहराई शामिल की
Answer: C) Omitted the width of the rim / रिम की चौड़ाई को शामिल नहीं किया
Description:
Rim size is defined by both diameter and width. Measuring only the outside diameter does not provide the complete rim specification.
हिंदी में:
रिम का आकार केवल व्यास से नहीं बल्कि उसकी चौड़ाई (Width) से भी निर्धारित होता है। केवल बाहरी व्यास मापने से रिम का पूरा आकार ज्ञात नहीं होता।
Q.10 Which component directly connects the engine crankshaft to the automatic transmission in a torque converter system?
टॉर्क कन्वर्टर प्रणाली में इंजन के क्रैंकशाफ्ट को ऑटोमैटिक ट्रांसमिशन से सीधे जोड़ने वाला भाग कौन-सा है?
A) Drive plate / ड्राइव प्लेट B) Clutch / क्लच C) Governor / गवर्नर D) Oil pump / ऑयल पंप
Answer: A) Drive plate / ड्राइव प्लेट
Description:
The drive plate (flex plate) is bolted to the engine crankshaft and connects it to the torque converter, transmitting engine power to the automatic transmission.
हिंदी में:
ड्राइव प्लेट (फ्लेक्स प्लेट) इंजन के क्रैंकशाफ्ट से जुड़ी होती है और टॉर्क कन्वर्टर के माध्यम से शक्ति को ऑटोमैटिक ट्रांसमिशन तक पहुंचाती है।
Q.11 What are the likely consequences of air leaking into a lift pump inlet during operation?
संचालन के दौरान यदि लिफ्ट पंप के इनलेट में हवा प्रवेश कर जाए तो इसके संभावित परिणाम क्या होंगे?
A) Engine runs cooler / इंजन अधिक ठंडा चलेगा B) Engine power increases / इंजन की शक्ति बढ़ जाएगी C) Engine may run irregularly / इंजन अनियमित रूप से चल सकता है D) Emissions are improved / उत्सर्जन में सुधार होगा
Answer: C) Engine may run irregularly / इंजन अनियमित रूप से चल सकता है
Description:
Air entering the lift pump inlet can interrupt the fuel supply, causing unstable engine operation, misfiring, power loss, and difficulty in maintaining smooth running.
हिंदी में:
यदि लिफ्ट पंप के इनलेट से हवा प्रवेश करती है, तो ईंधन आपूर्ति बाधित हो सकती है। इससे इंजन अनियमित रूप से चल सकता है, मिसफायरिंग हो सकती है तथा शक्ति में कमी आ सकती है।
Q.12 Which application best demonstrates the practical use of outside callipers in automotive work?
ऑटोमोबाइल कार्य में Outside Callipers का व्यावहारिक उपयोग किस कार्य में सबसे अच्छी तरह दर्शाया जाता है?
A) Checking uniform shaft diameter at different locations / विभिन्न स्थानों पर शाफ्ट के समान व्यास की जांच करना B) Measuring drilled hole depth during machining work / मशीनिंग कार्य के दौरान ड्रिल किए गए छेद की गहराई मापना C) Marking reference lines on fabricated metal surfaces / निर्मित धातु सतहों पर संदर्भ रेखाएँ अंकित करना D) Measuring internal bore diameter of engine cylinders / इंजन सिलेंडर के आंतरिक बोर व्यास को मापना
Answer: A) Checking uniform shaft diameter at different locations / विभिन्न स्थानों पर शाफ्ट के समान व्यास की जांच करना
Description:
Outside callipers are used for comparing and checking external dimensions such as shaft diameters at different points.
हिंदी में:
Outside Callipers का उपयोग बाहरी आयामों को मापने और तुलना करने के लिए किया जाता है, जैसे शाफ्ट के विभिन्न स्थानों पर व्यास की समानता जांचना।
Q.13 Which symptom can indicate improper alignment of the piston assembly?
पिस्टन असेंबली के गलत संरेखण (Improper Alignment) का संकेत कौन-सा लक्षण दे सकता है?
A) High coolant loss from engine / इंजन से कूलेंट का अत्यधिक रिसाव B) Increased oil pressure reading / ऑयल प्रेशर रीडिंग में वृद्धि C) Fuel dilution in oil sump / ऑयल सम्प में ईंधन का मिलना D) Irregular wear on piston skirt / पिस्टन स्कर्ट पर असामान्य घिसाव
Answer: D) Irregular wear on piston skirt / पिस्टन स्कर्ट पर असामान्य घिसाव
Description:
Improper piston alignment causes uneven contact between the piston skirt and cylinder wall, leading to irregular wear patterns.
हिंदी में:
यदि पिस्टन असेंबली सही संरेखण में नहीं है, तो पिस्टन स्कर्ट और सिलेंडर दीवार के बीच असमान संपर्क होता है, जिससे असामान्य घिसाव दिखाई देता है।
Q.14 How do some run-flat tyres support vehicle weight after a puncture?
कुछ Run-Flat Tyres पंचर होने के बाद भी वाहन का भार कैसे सहन करते हैं?
A) By containing a rubber foam insert inside the tyre / टायर के अंदर रबर फोम डालकर B) By having an extra air reservoir in the rim / रिम में अतिरिक्त एयर रिजर्व रखकर C) By using stiffer sidewalls that can support the vehicle / अधिक मजबूत साइडवॉल का उपयोग करके जो वाहन का भार सह सके D) By reinforcing the tread with steel mesh / ट्रेड को स्टील जाल से मजबूत बनाकर
Answer: C) By using stiffer sidewalls that can support the vehicle / अधिक मजबूत साइडवॉल का उपयोग करके जो वाहन का भार सह सके
Description:
Run-flat tyres are designed with reinforced sidewalls that can temporarily support the vehicle even after loss of air pressure.
हिंदी में:
Run-Flat Tyres की साइडवॉल विशेष रूप से मजबूत बनाई जाती हैं, जिससे हवा निकल जाने के बाद भी वे कुछ दूरी तक वाहन का भार सहन कर सकती हैं।
Q.15 Which of the following component links both the steering arms together in the conventional steering system?
पारंपरिक स्टीयरिंग प्रणाली में निम्नलिखित में से कौन-सा घटक दोनों स्टीयरिंग आर्म्स को आपस में जोड़ता है?
A) The drag link / ड्रैग लिंक B) The stabilizer bar / स्टेबलाइज़र बार C) The drop arm / ड्रॉप आर्म D) The track rod / ट्रैक रॉड
Answer: D) The track rod / ट्रैक रॉड
Description:
The track rod connects both steering arms and ensures that both wheels turn together in the correct relationship during steering.
हिंदी में:
ट्रैक रॉड दोनों स्टीयरिंग आर्म्स को जोड़ती है और यह सुनिश्चित करती है कि स्टीयरिंग घुमाने पर दोनों पहिए सही अनुपात में एक साथ मुड़ें।
Q.16 In a pure intrinsic semiconductor, where is the Fermi level located?
शुद्ध (Intrinsic) Semiconductor में Fermi Level कहाँ स्थित होता है?
A) Inside the conduction band / कंडक्शन बैंड के अंदर B) Near the middle of the forbidden energy gap / निषिद्ध ऊर्जा अंतराल (Forbidden Energy Gap) के मध्य के पास C) Inside the valence band / वैलेंस बैंड के अंदर D) Near the power supply voltage / पावर सप्लाई वोल्टेज के पास
Answer: B) Near the middle of the forbidden energy gap / निषिद्ध ऊर्जा अंतराल के मध्य के पास
Description:
In a pure intrinsic semiconductor, the number of electrons and holes is equal. Therefore, the Fermi level lies approximately at the center of the forbidden energy gap.
हिंदी में:
शुद्ध इंट्रिंसिक सेमीकंडक्टर में इलेक्ट्रॉनों और होल्स की संख्या समान होती है। इसलिए Fermi Level सामान्यतः Forbidden Energy Gap के मध्य के पास स्थित होता है।
Q.17 A technician needs to synchronize the extension speed of two hydraulic cylinders operating under different loads. Which application of flow control valves is most effective?
एक तकनीशियन को अलग-अलग भार पर कार्य कर रहे दो हाइड्रोलिक सिलेंडरों की विस्तार गति (Extension Speed) को समान करना है। Flow Control Valve का कौन-सा उपयोग सबसे प्रभावी होगा?
A) Placing a flow control valve only in the return line from both cylinders / केवल रिटर्न लाइन में फ्लो कंट्रोल वाल्व लगाना B) Installing flow control valves in the lines to both cylinders to balance fluid flow / दोनों सिलेंडरों की लाइनों में फ्लो कंट्रोल वाल्व लगाकर द्रव प्रवाह को संतुलित करना C) Adjusting pump output to increase overall system pressure for both cylinders / दोनों सिलेंडरों के लिए पंप का दबाव बढ़ाना D) Using a pressure relief valve to stabilize system pressure for both cylinders / सिस्टम प्रेशर स्थिर करने हेतु प्रेशर रिलीफ वाल्व का उपयोग करना
Answer: B) Installing flow control valves in the lines to both cylinders to balance fluid flow / दोनों सिलेंडरों की लाइनों में फ्लो कंट्रोल वाल्व लगाकर द्रव प्रवाह को संतुलित करना
Description:
Flow control valves regulate the flow rate to each cylinder, helping both cylinders move at similar speeds even when the loads are different.
हिंदी में:
फ्लो कंट्रोल वाल्व प्रत्येक सिलेंडर में जाने वाले द्रव के प्रवाह को नियंत्रित करते हैं, जिससे अलग-अलग भार होने पर भी दोनों सिलेंडर लगभग समान गति से कार्य कर सकते हैं।
Q.18 Which failure is most likely if the camshaft drive gears are worn out?
यदि Camshaft Drive Gears घिस जाएँ तो सबसे संभावित खराबी क्या होगी?
A) Coolant will leak from the radiator / रेडिएटर से कूलेंट का रिसाव होगा B) Alternator will generate excess current / अल्टरनेटर अत्यधिक धारा उत्पन्न करेगा C) Fuel delivery will be blocked / ईंधन आपूर्ति रुक जाएगी D) Valve timing will become inaccurate / वाल्व टाइमिंग गलत हो जाएगी
Answer: D) Valve timing will become inaccurate / वाल्व टाइमिंग गलत हो जाएगी
Description:
Worn camshaft drive gears can alter the synchronization between the crankshaft and camshaft, resulting in incorrect valve timing and poor engine performance.
हिंदी में:
कैमशाफ्ट ड्राइव गियर घिस जाने पर क्रैंकशाफ्ट और कैमशाफ्ट के बीच समन्वय बिगड़ जाता है, जिससे वाल्व टाइमिंग गलत हो जाती है और इंजन का प्रदर्शन प्रभावित होता है।
Q.19 What is a common symptom of a failing electric vehicle battery?
खराब होती हुई इलेक्ट्रिक वाहन (EV) बैटरी का सामान्य लक्षण क्या है?
A) High oil consumption / अधिक तेल की खपत B) Knocking engine sound / इंजन में नॉकिंग की आवाज C) Reduced driving range / वाहन की चलने की दूरी कम हो जाना D) Unusual exhaust smoke / असामान्य एग्जॉस्ट धुआँ
Answer: C) Reduced driving range / वाहन की चलने की दूरी कम हो जाना
Description:
As an EV battery degrades, its energy storage capacity decreases, resulting in a noticeable reduction in driving range.
हिंदी में:
जब EV बैटरी पुरानी या कमजोर होने लगती है, तो उसकी ऊर्जा संग्रहण क्षमता कम हो जाती है, जिससे वाहन की एक बार चार्ज करने पर चलने की दूरी घट जाती है।
Q.20 Which scenario best demonstrates the advantage of electronic adjustable shock absorbers on different road conditions?
विभिन्न सड़क परिस्थितियों में Electronic Adjustable Shock Absorbers का सबसे बड़ा लाभ किस स्थिति में दिखाई देता है?
A) Using only manual adjustments without electronics / केवल मैनुअल समायोजन का उपयोग करना B) Changing the damping rate according to road conditions / सड़क की स्थिति के अनुसार डैम्पिंग दर बदलना C) Keeping the damping rate unchanged regardless of speed / गति की परवाह किए बिना डैम्पिंग दर समान रखना D) Maintaining a fixed soft setting for all driving conditions / सभी परिस्थितियों में एक ही सॉफ्ट सेटिंग रखना
Answer: B) Changing the damping rate according to road conditions / सड़क की स्थिति के अनुसार डैम्पिंग दर बदलना
Description:
Electronic adjustable shock absorbers automatically modify damping characteristics according to road and driving conditions, improving ride comfort and vehicle stability.
हिंदी में:
Electronic Adjustable Shock Absorbers सड़क और ड्राइविंग परिस्थितियों के अनुसार स्वतः डैम्पिंग को बदलते हैं, जिससे आरामदायक यात्रा और बेहतर वाहन नियंत्रण प्राप्त होता है।
Q.21 If the Engine Control Unit (ECU) detects a fault, how can the specific problem area be identified?
यदि Engine Control Unit (ECU) किसी खराबी का पता लगाती है, तो समस्या वाले क्षेत्र की पहचान कैसे की जा सकती है?
A) By checking engine oil viscosity / इंजन ऑयल की विस्कोसिटी जांचकर
B) By a code provided by the ECU / ECU द्वारा दिए गए कोड के माध्यम से
C) By checking engine spark plugs / इंजन के स्पार्क प्लग जांचकर
D) By checking compression pressure / कम्प्रेशन प्रेशर जांचकर
Answer: B) By a code provided by the ECU / ECU द्वारा दिए गए कोड के माध्यम से
Description:
The ECU stores and generates Diagnostic Trouble Codes (DTCs) whenever it detects a fault. These codes help technicians quickly identify the affected system or component and perform accurate troubleshooting.
हिंदी में:
जब ECU किसी खराबी का पता लगाती है, तो वह Diagnostic Trouble Code (DTC) उत्पन्न करती है। इस कोड की सहायता से तकनीशियन संबंधित सिस्टम या कंपोनेंट की पहचान करके सही तरीके से समस्या का समाधान कर सकते हैं।
Q.22 Which engine cooling method removes heat by circulating a liquid around the cylinder walls and transferring it to a radiator?
सिलेंडर वॉल्स के आसपास द्रव प्रवाहित करके तथा रेडिएटर तक ऊष्मा पहुंचाकर कौन-सी इंजन कूलिंग विधि गर्मी को हटाती है?
A) Water cooling method using liquid coolant / द्रव कूलेंट द्वारा जल शीतलन विधि
B) Oil cooling method using lubricating oil / लुब्रिकेटिंग ऑयल द्वारा ऑयल कूलिंग
C) Air cooling method using cooling fins / कूलिंग फिन्स द्वारा वायु शीतलन
D) Exhaust cooling method using outlet gases / निकास गैसों द्वारा शीतलन
Answer: A) Water cooling method using liquid coolant / द्रव कूलेंट द्वारा जल शीतलन विधि
Description:
In a water-cooling system, coolant circulates around the engine cylinder walls, absorbs heat, and carries it to the radiator where the heat is dissipated into the atmosphere.
हिंदी में:
वॉटर कूलिंग सिस्टम में कूलेंट इंजन के सिलेंडर वॉल्स के चारों ओर घूमता है, गर्मी को अवशोषित करता है और उसे रेडिएटर तक पहुंचाता है, जहां यह ऊष्मा वातावरण में निकल जाती है।
Q.23 A vehicle's Diagnostic Trouble Code (DTC) is read as a generic code. What does this imply about the fault?
यदि किसी वाहन का Diagnostic Trouble Code (DTC) एक Generic Code के रूप में पढ़ा जाता है, तो इसका क्या अर्थ है?
A) The issue is defined by manufacturer and not unique to the industry standards / समस्या निर्माता द्वारा परिभाषित है और उद्योग मानकों का हिस्सा नहीं है
B) The code is not recognized by the code reader, needs update / कोड रीडर कोड को पहचान नहीं पा रहा है
C) The issue is defined by industry standards and not unique to the manufacturer / समस्या उद्योग मानकों द्वारा परिभाषित है और किसी विशेष निर्माता तक सीमित नहीं है
D) The problem is unique to that vehicle model / समस्या केवल उसी वाहन मॉडल से संबंधित है
Answer: C) The issue is defined by industry standards and not unique to the manufacturer / समस्या उद्योग मानकों द्वारा परिभाषित है और किसी विशेष निर्माता तक सीमित नहीं है
Description:
Generic DTCs are standardized under OBD-II regulations and have the same meaning across different vehicle manufacturers.
हिंदी में:
Generic DTC को OBD-II मानकों के अनुसार परिभाषित किया जाता है। इसलिए इनका अर्थ विभिन्न वाहन निर्माताओं में समान रहता है और यह किसी एक निर्माता के लिए विशिष्ट नहीं होते।
Q.24 Why must the secondary pulley shaft in a Continuously Variable Transmission (CVT) be manufactured precisely?
Continuously Variable Transmission (CVT) में Secondary Pulley Shaft को अत्यधिक सटीकता से क्यों बनाया जाता है?
A) Allow flexibility during operation / संचालन के दौरान लचीलापन प्रदान करने के लिए
B) Ensure accurate torque transmission / सटीक टॉर्क ट्रांसमिशन सुनिश्चित करने के लिए
C) Adjust its length automatically / इसकी लंबाई स्वतः समायोजित करने के लिए
D) Resist chemical corrosion / रासायनिक जंग का प्रतिरोध करने के लिए
Answer: B) Ensure accurate torque transmission / सटीक टॉर्क ट्रांसमिशन सुनिश्चित करने के लिए
Description:
The secondary pulley shaft must maintain proper alignment and dimensional accuracy to ensure smooth power transfer and efficient torque transmission in the CVT system.
हिंदी में:
CVT में Secondary Pulley Shaft की सही एलाइनमेंट और सटीक माप आवश्यक होते हैं, जिससे शक्ति का सुचारु हस्तांतरण और प्रभावी टॉर्क ट्रांसमिशन सुनिश्चित हो सके।
Q.25 Why is it important to use a V block when drilling a round rod?
गोल रॉड में ड्रिलिंग करते समय V-Block का उपयोग क्यों महत्वपूर्ण है?
A) It cools the workpiece / यह वर्कपीस को ठंडा करता है
B) It changes the drill size / यह ड्रिल के आकार को बदलता है
C) It prevents the rod from rolling / यह रॉड को लुढ़कने से रोकता है
D) It increases drilling speed / यह ड्रिलिंग की गति बढ़ाता है
Answer: C) It prevents the rod from rolling / यह रॉड को लुढ़कने से रोकता है
Description:
A V-block securely holds cylindrical workpieces during drilling, marking, or machining operations and prevents unwanted movement.
हिंदी में:
V-Block बेलनाकार (Cylindrical) वर्कपीस को मजबूती से पकड़कर रखता है तथा ड्रिलिंग या मशीनिंग के दौरान उसे लुढ़कने या हिलने से रोकता है।
Q.26 Why are hydraulic systems used in automobile power steering mechanisms?
ऑटोमोबाइल के पावर स्टीयरिंग मैकेनिज्म में हाइड्रोलिक सिस्टम का उपयोग क्यों किया जाता है?
A) They decrease fuel consumption at high speed / वे उच्च गति पर ईंधन की खपत कम करते हैं
B) They reduce driver effort when turning the wheel / वे स्टीयरिंग घुमाते समय चालक के प्रयास को कम करते हैं
C) They control the lighting circuits in vehicles / वे वाहन की लाइटिंग सर्किट को नियंत्रित करते हैं
D) They increase engine speed during turns / वे मोड़ के दौरान इंजन की गति बढ़ाते हैं
Answer: B) They reduce driver effort when turning the wheel / वे स्टीयरिंग घुमाते समय चालक के प्रयास को कम करते हैं
Description:
Hydraulic power steering uses fluid pressure to assist steering movement, making it easier for the driver to turn the wheels, especially at low speeds and during parking.
हिंदी में:
हाइड्रोलिक पावर स्टीयरिंग द्रव दाब (Fluid Pressure) का उपयोग करके स्टीयरिंग घुमाने में सहायता करता है, जिससे कम गति और पार्किंग के समय चालक को कम बल लगाना पड़ता है।
Q.27 When using a depth micrometer, which constructional aspect helps keep the instrument stable and reduce measurement error?
Depth Micrometer का उपयोग करते समय कौन-सी निर्माणात्मक विशेषता उपकरण को स्थिर रखती है और मापन त्रुटि को कम करती है?
A) The rigid base minimizes movement during use / कठोर आधार उपयोग के दौरान गति को न्यूनतम करता है
B) The thimble resists external vibrations / थिम्बल बाहरी कंपन का प्रतिरोध करता है
C) The ratchet stop absorbs vibration impacts / रैचेट स्टॉप कंपन को अवशोषित करता है
D) The rods stabilize the entire instrument / रॉड पूरे उपकरण को स्थिर बनाते हैं
Answer: A) The rigid base minimizes movement during use / कठोर आधार उपयोग के दौरान गति को न्यूनतम करता है
Description:
A rigid and accurately machined base ensures proper seating of the depth micrometer on the reference surface, improving stability and measurement accuracy.
हिंदी में:
Depth Micrometer का कठोर एवं सटीक आधार संदर्भ सतह पर सही बैठता है, जिससे उपकरण स्थिर रहता है और मापन अधिक सटीक होता है।
Q.28 What is a critical factor to consider when selecting a taper reamer for aligning two components with a tapered pin?
टेपर पिन द्वारा दो घटकों को संरेखित करने हेतु Taper Reamer चुनते समय कौन-सा महत्वपूर्ण कारक है?
A) Selecting the hardest available material / उपलब्ध सबसे कठोर सामग्री चुनना
B) Matching the taper angle of the pin and reamer / पिन और रीमर के टेपर कोण का मिलान करना
C) Ensuring equal tool length to the pin / टूल की लंबाई को पिन के बराबर रखना
D) Matching the flute count to the pin / फ्लूट की संख्या का पिन से मिलान करना
Answer: B) Matching the taper angle of the pin and reamer / पिन और रीमर के टेपर कोण का मिलान करना
Description:
For proper fit and alignment, the taper angle of the reamer must match the taper angle of the pin. Incorrect matching can result in poor seating and misalignment.
हिंदी में:
सही फिटिंग और एलाइनमेंट के लिए रीमर का टेपर कोण पिन के टेपर कोण के समान होना चाहिए। अन्यथा गलत फिटिंग और मिस-अलाइनमेंट हो सकता है।
Q.29 If the potentiometer in the vane-type air flow sensor fails, what is a likely result?
यदि Vane-Type Air Flow Sensor में Potentiometer खराब हो जाए, तो संभावित परिणाम क्या होगा?
A) The ECU ignores all sensor inputs / ECU सभी सेंसर इनपुट को अनदेखा कर देता है
B) The sensor measures fuel pressure in place of air / सेंसर हवा की जगह ईंधन दाब मापने लगता है
C) The ECU receives inaccurate airflow data / ECU को गलत एयरफ्लो डेटा प्राप्त होता है
D) The injectors are directly controlled by the potentiometer / इंजेक्टर सीधे पोटेंशियोमीटर द्वारा नियंत्रित होते हैं
Answer: C) The ECU receives inaccurate airflow data / ECU को गलत एयरफ्लो डेटा प्राप्त होता है
Description:
The potentiometer converts vane movement into an electrical signal. If it fails, incorrect airflow information is sent to the ECU, affecting engine performance.
हिंदी में:
पोटेंशियोमीटर वैन की गति को विद्युत संकेत में बदलता है। इसके खराब होने पर ECU को गलत एयरफ्लो डेटा मिलता है, जिससे इंजन की कार्यक्षमता प्रभावित होती है।
Q.30 Which impact is most directly associated with the use of extractors in a vehicle's exhaust system under sustained high engine speeds?
उच्च इंजन गति पर वाहन के एग्जॉस्ट सिस्टम में Extractor के उपयोग का सबसे प्रत्यक्ष प्रभाव क्या है?
A) Improved noise insulation in the cabin / केबिन में बेहतर शोर रोधन
B) Enhanced exhaust gas flow at high rpm / उच्च RPM पर एग्जॉस्ट गैस प्रवाह में सुधार
C) Reduced exhaust temperature during operation / संचालन के दौरान एग्जॉस्ट तापमान में कमी
D) Increased overall engine size / इंजन के कुल आकार में वृद्धि
Answer: B) Enhanced exhaust gas flow at high rpm / उच्च RPM पर एग्जॉस्ट गैस प्रवाह में सुधार
Description:
Extractors improve scavenging and reduce exhaust back pressure, allowing exhaust gases to flow more efficiently at higher engine speeds.
हिंदी में:
Extractor एग्जॉस्ट बैक प्रेशर को कम करके गैसों के प्रवाह को बेहतर बनाते हैं, जिससे उच्च RPM पर इंजन का प्रदर्शन सुधरता है।
Q.31 What is the primary function of a proportioning valve in a front disc, rear drum brake system?
Front Disc तथा Rear Drum Brake System में Proportioning Valve का मुख्य कार्य क्या है?
A) To restrict fluid pressure to the front brakes during hard braking / तेज ब्रेकिंग के दौरान फ्रंट ब्रेक का दाब कम करना
B) To increase fluid pressure to the rear brakes at all times / हमेशा रियर ब्रेक का दाब बढ़ाना
C) To restrict fluid pressure to the rear brakes during hard braking / तेज ब्रेकिंग के दौरान रियर ब्रेक का दाब सीमित करना
D) To act as a warning device for brake failure / ब्रेक फेल होने पर चेतावनी देना
Answer: C) To restrict fluid pressure to the rear brakes during hard braking / तेज ब्रेकिंग के दौरान रियर ब्रेक का दाब सीमित करना
Description:
A proportioning valve prevents rear wheel lock-up by limiting hydraulic pressure to the rear brakes during heavy braking.
हिंदी में:
Proportioning Valve तेज ब्रेकिंग के दौरान रियर ब्रेक पर जाने वाले हाइड्रोलिक दाब को सीमित करता है, जिससे पीछे के पहिए लॉक होने से बचते हैं।
Q.32 Which practice best ensures driver safety during road testing of vehicles after major repairs?
बड़ी मरम्मत के बाद वाहन की रोड टेस्टिंग के दौरान चालक की सुरक्षा सुनिश्चित करने के लिए सबसे अच्छी प्रथा कौन-सी है?
A) Following safety checks and wearing proper gear / सुरक्षा जांच करना और उचित सुरक्षा उपकरण पहनना
B) Depending on previous records before the road test / रोड टेस्ट से पहले पुराने रिकॉर्ड पर निर्भर रहना
C) Inspecting vehicle systems without using safety gear / बिना सुरक्षा उपकरण के वाहन की जांच करना
D) Monitoring engine sounds during the complete test / पूरे परीक्षण के दौरान केवल इंजन की आवाज़ सुनना
Answer: A) Following safety checks and wearing proper gear / सुरक्षा जांच करना और उचित सुरक्षा उपकरण पहनना
Description:
Road testing after major repairs should always include safety inspections, use of protective gear, and verification of critical vehicle systems before driving.
हिंदी में:
बड़ी मरम्मत के बाद रोड टेस्ट से पहले सुरक्षा जांच, आवश्यक सुरक्षा उपकरणों का उपयोग तथा महत्वपूर्ण वाहन प्रणालियों का सत्यापन करना चालक की सुरक्षा के लिए अत्यंत आवश्यक है।
Q.33 Which state does the refrigerant enter the compressor in an automobile HVAC system?
ऑटोमोबाइल HVAC सिस्टम में रेफ्रिजरेंट कम्प्रेसर में किस अवस्था में प्रवेश करता है?
A) High-pressure gas / उच्च दाब गैस
B) High-pressure liquid / उच्च दाब द्रव
C) Low-pressure liquid / निम्न दाब द्रव
D) Low-pressure gas / निम्न दाब गैस
Answer: D) Low-pressure gas / निम्न दाब गैस
Description:
In an automotive air-conditioning system, the refrigerant enters the compressor as a low-pressure, low-temperature gas from the evaporator. The compressor then compresses it into a high-pressure gas.
हिंदी में:
ऑटोमोबाइल एयर कंडीशनिंग सिस्टम में रेफ्रिजरेंट इवेपोरेटर से निम्न दाब एवं निम्न तापमान वाली गैस के रूप में कम्प्रेसर में प्रवेश करता है। कम्प्रेसर इसे उच्च दाब वाली गैस में परिवर्तित करता है।
Q.34 What does a higher octane rating in gasoline primarily indicate about the fuel?
पेट्रोल में उच्च Octane Rating मुख्य रूप से किस बात को दर्शाती है?
A) It resists knocking during combustion / यह दहन के दौरान नॉकिंग का बेहतर प्रतिरोध करता है
B) It improves exhaust emission quality / यह एग्जॉस्ट उत्सर्जन गुणवत्ता में सुधार करता है
C) It boosts the fuel energy content / यह ईंधन की ऊर्जा मात्रा बढ़ाता है
D) It increases the engine cooling effect / यह इंजन के शीतलन प्रभाव को बढ़ाता है
Answer: A) It resists knocking during combustion / यह दहन के दौरान नॉकिंग का बेहतर प्रतिरोध करता है
Description:
Octane rating measures a fuel’s ability to resist knocking or pre-ignition in spark-ignition engines. Higher octane fuel can withstand greater compression before igniting.
हिंदी में:
Octane Rating ईंधन की नॉकिंग (Knocking) का प्रतिरोध करने की क्षमता को दर्शाती है। उच्च ऑक्टेन ईंधन अधिक संपीड़न (Compression) सहन कर सकता है और समय से पहले प्रज्वलित नहीं होता।
Q.35 Which method is recommended for safely cleaning toxic dust from vehicle components in a workshop?
वर्कशॉप में वाहन के भागों पर जमी विषैली धूल को सुरक्षित रूप से साफ करने के लिए कौन-सी विधि अनुशंसित है?
A) Wiping by hand with cloth / कपड़े से हाथ द्वारा साफ करना
B) Dry sweeping with a broom / झाड़ू से सूखी सफाई करना
C) Compressed air blowing / संपीड़ित हवा से उड़ाना
Description:
Vacuum cleaning safely removes toxic dust without dispersing harmful particles into the air, reducing health risks for workers.
हिंदी में:
वैक्यूम क्लीनिंग उपकरण विषैले धूल कणों को हवा में फैलाए बिना सुरक्षित रूप से हटाता है, जिससे कर्मचारियों के स्वास्थ्य पर खतरा कम होता है।
Q.36 What principle does the height sensor use to function in an electronically controlled air suspension system?
इलेक्ट्रॉनिक रूप से नियंत्रित एयर सस्पेंशन सिस्टम में Height Sensor किस सिद्धांत पर कार्य करता है?
A) Pressure principle / दाब सिद्धांत
B) Electromagnetic induction principle / विद्युतचुंबकीय प्रेरण सिद्धांत
C) Thermal expansion principle / ऊष्मीय प्रसार सिद्धांत
D) Piezoelectric effect principle / पीजोइलेक्ट्रिक प्रभाव सिद्धांत
Answer: B) Electromagnetic induction principle / विद्युतचुंबकीय प्रेरण सिद्धांत
Description:
Height sensors in electronically controlled air suspension systems commonly use electromagnetic sensing techniques to detect suspension position and vehicle height accurately.
हिंदी में:
इलेक्ट्रॉनिक एयर सस्पेंशन सिस्टम में Height Sensor वाहन की ऊँचाई और सस्पेंशन की स्थिति को मापने के लिए प्रायः विद्युतचुंबकीय प्रेरण (Electromagnetic Induction) सिद्धांत का उपयोग करता है।
Q.37 If the centrifugal advance mechanism fails and does not advance the ignition timing, what is a likely result?
यदि Centrifugal Advance Mechanism खराब हो जाए और Ignition Timing को आगे न बढ़ाए, तो संभावित परिणाम क्या होगा?
A) Engine may lose power at higher speeds / इंजन उच्च गति पर शक्ति खो सकता है
B) Engine will run at maximum efficiency / इंजन अधिकतम दक्षता पर चलेगा
C) Engine will overheat quickly / इंजन जल्दी गर्म हो जाएगा
D) Engine may lose power at lower speeds / इंजन कम गति पर शक्ति खो सकता है
Answer: A) Engine may lose power at higher speeds / इंजन उच्च गति पर शक्ति खो सकता है
Description:
At higher engine speeds, ignition timing must advance for efficient combustion. If the centrifugal advance mechanism fails, combustion becomes less efficient, reducing engine power.
हिंदी में:
उच्च इंजन गति पर सही दहन के लिए Ignition Timing को आगे बढ़ाना आवश्यक होता है। यदि Centrifugal Advance Mechanism कार्य नहीं करता, तो इंजन की शक्ति और प्रदर्शन कम हो सकता है।
Q.38 Which component supplies current to the rotor windings in most alternators?
अधिकांश Alternator में Rotor Windings को करंट कौन-सा भाग प्रदान करता है?
A) Voltage regulator unit / वोल्टेज रेगुलेटर यूनिट
B) Ignition switch contacts / इग्निशन स्विच कॉन्टैक्ट्स
C) Diodes and rectifier / डायोड एवं रेक्टिफायर
D) Slip rings and brushes / स्लिप रिंग्स और ब्रश
Answer: D) Slip rings and brushes / स्लिप रिंग्स और ब्रश
Description:
Slip rings and brushes transfer excitation current from the stationary circuit to the rotating rotor winding of the alternator.
हिंदी में:
Slip Rings और Brushes स्थिर विद्युत सर्किट से घूमते हुए Rotor Winding तक Excitation Current पहुंचाते हैं, जिससे चुंबकीय क्षेत्र उत्पन्न होता है।
Q.39 If a mechanic finds that the engine does not start even though the battery is fully charged, which electrical connection or component should be checked next?
यदि बैटरी पूरी तरह चार्ज होने के बावजूद इंजन स्टार्ट नहीं होता है, तो अगला कौन-सा विद्युत कनेक्शन या कंपोनेंट जांचना चाहिए?
A) Faulty ignition switch contacts / खराब इग्निशन स्विच कॉन्टैक्ट्स
B) Blown main starter fuse / जला हुआ मुख्य स्टार्टर फ्यूज
Answer: C) Loose battery terminal / ढीला बैटरी टर्मिनल
Description:
Even if the battery is fully charged, loose battery terminals can prevent sufficient current flow to the starter motor, causing a no-start condition.
हिंदी में:
बैटरी चार्ज होने के बावजूद यदि उसके टर्मिनल ढीले हों, तो स्टार्टर मोटर तक पर्याप्त करंट नहीं पहुंच पाता और इंजन स्टार्ट नहीं होता। इसलिए सबसे पहले बैटरी टर्मिनलों की जांच करनी चाहिए।
Q.40 A mechanic is diagnosing a vehicle with poor acceleration and suspects a fuel system issue. Which test would best confirm whether incorrect fuel pressure is the cause?
एक मैकेनिक वाहन में खराब एक्सेलेरेशन की जांच कर रहा है और उसे फ्यूल सिस्टम में खराबी का संदेह है। गलत फ्यूल प्रेशर की पुष्टि करने के लिए कौन-सा परीक्षण सबसे उपयुक्त होगा?
A) Inspect the injectors for clogging and leaks / इंजेक्टरों में जाम या लीकेज की जांच करना
B) Listen for the fuel pump sound during ignition / इग्निशन के समय फ्यूल पंप की आवाज सुनना
C) Measure pressure at the rail and compare to specifications / फ्यूल रेल पर प्रेशर मापकर उसे निर्धारित मानों से तुलना करना
D) Replace the fuel filter and observe improvement / फ्यूल फ़िल्टर बदलकर सुधार देखना
Answer: C) Measure pressure at the rail and compare to specifications / फ्यूल रेल पर प्रेशर मापकर उसे निर्धारित मानों से तुलना करना
Description:
Checking fuel rail pressure with a pressure gauge and comparing it with manufacturer specifications is the most accurate way to determine whether incorrect fuel pressure is causing poor acceleration.
हिंदी में:
फ्यूल रेल का प्रेशर गेज द्वारा मापकर निर्माता द्वारा निर्धारित मानों से तुलना करना यह पता लगाने का सबसे सटीक तरीका है कि खराब एक्सेलेरेशन का कारण गलत फ्यूल प्रेशर है या नहीं।
Q.41 Why is torque specification important when tightening bolts during diesel engine assembly?
डीजल इंजन असेंबली के दौरान बोल्ट कसते समय Torque Specification क्यों महत्वपूर्ण होती है?
A) It ensures that hand tightening alone is always sufficient for all bolts / यह सुनिश्चित करती है कि केवल हाथ से कसना ही पर्याप्त हो
B) It ensures that any arbitrary amount of torque can be applied manually / यह सुनिश्चित करती है कि कोई भी मनचाहा टॉर्क लगाया जा सकता है
C) It ensures bolts have a clearance fit with the nuts and saves time in assembly / यह बोल्ट और नट के बीच क्लियरेंस फिट सुनिश्चित करती है
D) It ensures bolts are neither too loose nor too tight for engine safety / यह सुनिश्चित करती है कि बोल्ट न बहुत ढीले हों और न ही अत्यधिक कसे हों
Answer: D) It ensures bolts are neither too loose nor too tight for engine safety / यह सुनिश्चित करती है कि बोल्ट न बहुत ढीले हों और न ही अत्यधिक कसे हों
Description:
Correct torque ensures proper clamping force. Under-tightening can cause loosening and leakage, while over-tightening can damage threads or components.
हिंदी में:
सही टॉर्क लगाने से उचित क्लैम्पिंग फोर्स प्राप्त होती है। कम टॉर्क से बोल्ट ढीले हो सकते हैं, जबकि अधिक टॉर्क से थ्रेड या पार्ट्स को नुकसान पहुंच सकता है।
Q.42 Which of the following is NOT a characteristic of extension lines?
निम्नलिखित में से कौन-सा Extension Lines का गुण नहीं है?
A) They are drawn thicker than visible lines / इन्हें दृश्य रेखाओं से अधिक मोटा बनाया जाता है
B) They extend beyond dimension lines / ये Dimension Lines से आगे तक बढ़ती हैं
C) They are continuous without gaps / ये निरंतर पतली रेखाएँ होती हैं
D) They are thin in appearance / ये पतली दिखाई देती हैं
Answer: A) They are drawn thicker than visible lines / इन्हें दृश्य रेखाओं से अधिक मोटा बनाया जाता है
Description:
Extension lines are drawn as thin continuous lines and generally extend slightly beyond the dimension lines. They are never thicker than visible object lines.
हिंदी में:
Extension Lines पतली निरंतर रेखाओं के रूप में बनाई जाती हैं और Dimension Lines से थोड़ा आगे तक बढ़ती हैं। इन्हें कभी भी Visible Lines से अधिक मोटा नहीं बनाया जाता।
Q.43 A fan runs for 6 hours per day and consumes the rated power of 75 watts. How much energy will it consume in two days?
एक पंखा प्रतिदिन 6 घंटे चलता है और उसकी रेटेड शक्ति 75 वाट है। दो दिनों में वह कितनी ऊर्जा की खपत करेगा?
A) 75 watt-hours / 75 वाट-घंटे
B) 900 watt-hours / 900 वाट-घंटे
C) 150 watt-hours / 150 वाट-घंटे
D) 825 watt-hours / 825 वाट-घंटे
Answer: B) 900 watt-hours / 900 वाट-घंटे
Description:
Energy = Power × Time
Energy = 75 W × (6 × 2) h
Energy = 75 × 12 = 900 Wh
हिंदी में:
ऊर्जा = शक्ति × समय
ऊर्जा = 75 W × 12 घंटे = 900 Wh
अतः दो दिनों में ऊर्जा खपत 900 वाट-घंटे होगी।
Q.44 Which piston ring is designed to maintain proper tension and fit of other rings in the groove?
कौन-सी पिस्टन रिंग अन्य रिंगों के सही तनाव (Tension) और फिट को बनाए रखने के लिए डिज़ाइन की जाती है?
A) Scraper ring / स्क्रेपर रिंग
B) Compression ring / कंप्रेशन रिंग
C) Oil control ring / ऑयल कंट्रोल रिंग
D) Expander ring / एक्सपैंडर रिंग
Answer: D) Expander ring / एक्सपैंडर रिंग
Description:
The expander ring provides outward pressure and maintains proper contact of the piston rings with the cylinder wall, ensuring effective sealing.
हिंदी में:
Expander Ring अन्य रिंगों पर आवश्यक बाहरी दबाव बनाए रखती है, जिससे उनका सिलेंडर वॉल के साथ सही संपर्क बना रहता है और उचित सीलिंग प्राप्त होती है।
Q.45 Why is emery paper preferred over sandpaper for finishing metal surfaces in marking and measuring tasks?
मार्किंग और मापन कार्यों में धातु सतहों की फिनिशिंग के लिए Sandpaper की तुलना में Emery Paper को क्यों प्राथमिकता दी जाती है?
A) Emery paper produces less friction during use / एमरी पेपर उपयोग के दौरान कम घर्षण उत्पन्न करता है
B) Emery paper is harder and more durable / एमरी पेपर अधिक कठोर और टिकाऊ होता है
C) Emery paper absorbs oil better than sand paper / एमरी पेपर तेल को बेहतर अवशोषित करता है
D) Emery paper is specifically designed for cleaning wood surfaces / एमरी पेपर विशेष रूप से लकड़ी की सतह साफ करने के लिए बनाया गया है
Answer: B) Emery paper is harder and more durable / एमरी पेपर अधिक कठोर और टिकाऊ होता है
Description:
Emery paper contains hard abrasive particles that are suitable for metal finishing, deburring, and surface preparation.
हिंदी में:
Emery Paper में कठोर अपघर्षक (Abrasive) कण होते हैं जो धातु की सतह को फिनिश करने, बुर हटाने तथा सतह तैयार करने के लिए उपयुक्त होते हैं।
Q.46 When might a diesel actuator require recalibration after repairs?
मरम्मत के बाद Diesel Actuator को पुनः Calibration की आवश्यकता कब पड़ सकती है?
A) When replacing tires / टायर बदलने पर
B) After new battery is fitted / नई बैटरी लगाने के बाद
C) When changing engine oil / इंजन ऑयल बदलने पर
D) After fuel system repairs / फ्यूल सिस्टम की मरम्मत के बाद
Answer: D) After fuel system repairs / फ्यूल सिस्टम की मरम्मत के बाद
Description:
Fuel system repairs can affect actuator settings and fuel delivery characteristics. Recalibration ensures accurate control and proper engine performance.
हिंदी में:
फ्यूल सिस्टम की मरम्मत के बाद Actuator की सेटिंग और फ्यूल डिलीवरी प्रभावित हो सकती है। इसलिए सही नियंत्रण और बेहतर इंजन प्रदर्शन के लिए पुनः Calibration आवश्यक हो सकता है।
Q.47 Which technology ensures better fuel economy and emission control in modern petrol vehicles?
आधुनिक पेट्रोल वाहनों में बेहतर Fuel Economy और Emission Control कौन-सी तकनीक सुनिश्चित करती है?
A) Carburetor Fuel Supply System / कार्ब्यूरेटर फ्यूल सप्लाई सिस्टम B) Common Rail Direct Injection System / कॉमन रेल डायरेक्ट इंजेक्शन सिस्टम C) Single Point Fuel Injection System / सिंगल पॉइंट फ्यूल इंजेक्शन सिस्टम D) Multi Point Fuel Injection System / मल्टी पॉइंट फ्यूल इंजेक्शन सिस्टम
Answer: D) Multi Point Fuel Injection System / मल्टी पॉइंट फ्यूल इंजेक्शन सिस्टम
Description:
Multi Point Fuel Injection (MPFI) supplies fuel separately to each cylinder through individual injectors. This improves fuel-air mixing, increases fuel efficiency, reduces emissions, and enhances engine performance.
हिंदी में:
MPFI सिस्टम में प्रत्येक सिलेंडर को अलग इंजेक्टर द्वारा ईंधन दिया जाता है। इससे Fuel-Air Mixture बेहतर बनता है, ईंधन की बचत होती है, प्रदूषण कम होता है तथा इंजन का प्रदर्शन बेहतर होता है।
Q.48 Which part of a depth micrometer ensures stable positioning during measurement?
मापन के दौरान Depth Micrometer की स्थिर स्थिति (Stable Positioning) कौन-सा भाग सुनिश्चित करता है?
A) The broad base that rests on the surface / सतह पर टिकने वाला चौड़ा आधार B) The ratchet that applies pressure / दबाव लगाने वाला रैचेट C) The thimble used to rotate the spindle / स्पिंडल घुमाने के लिए प्रयुक्त थिम्बल D) The spindle that extends downward / नीचे की ओर बढ़ने वाला स्पिंडल
Answer: A) The broad base that rests on the surface / सतह पर टिकने वाला चौड़ा आधार
Description:
The broad base of a depth micrometer rests firmly on the reference surface and keeps the instrument stable, ensuring accurate depth measurements.
हिंदी में:
Depth Micrometer का चौड़ा आधार संदर्भ सतह पर मजबूती से टिकता है और उपकरण को स्थिर रखता है, जिससे गहराई का सही मापन संभव होता है।
Q.49 Which exhaust emission produced from sulphur present in automotive fuel contributes significantly to acid rain formation?
ऑटोमोबाइल ईंधन में मौजूद सल्फर से उत्पन्न कौन-सा उत्सर्जन अम्लीय वर्षा (Acid Rain) के निर्माण में महत्वपूर्ण योगदान देता है?
A) Nitrogen oxides / नाइट्रोजन ऑक्साइड B) Unburnt hydrocarbons / अपूर्ण जले हाइड्रोकार्बन C) Sulphur oxides / सल्फर ऑक्साइड D) Carbon monoxide / कार्बन मोनोऑक्साइड
Answer: C) Sulphur oxides / सल्फर ऑक्साइड
Description:
Sulphur present in fuel burns to form sulphur oxides (SOx), which react with atmospheric moisture and contribute to acid rain.
हिंदी में:
ईंधन में उपस्थित सल्फर जलने पर सल्फर ऑक्साइड (SOx) बनाता है। ये वायुमंडलीय नमी के साथ प्रतिक्रिया करके अम्लीय वर्षा (Acid Rain) का कारण बनते हैं।
Q.50 Which of the following workshop observations would suggest a steering column is NOT collapsible?
निम्नलिखित में से कौन-सा अवलोकन दर्शाता है कि Steering Column Collapsible नहीं है?
A) It uses an intermediate collapsible piece / इसमें मध्य में Collapsible भाग है B) It is built from one continuous solid rod / यह एक निरंतर ठोस रॉड से बना है C) It is divided into several connected parts / यह कई जुड़े हुए भागों में विभाजित है D) It has a flexible joint near the base / इसके आधार के पास एक Flexible Joint है
Answer: B) It is built from one continuous solid rod / यह एक निरंतर ठोस रॉड से बना है
Description:
A collapsible steering column is designed to compress during a collision. A single solid rod lacks this safety feature and is therefore non-collapsible.
हिंदी में:
Collapsible Steering Column दुर्घटना के समय संकुचित होकर चालक की सुरक्षा बढ़ाता है। एक ठोस और निरंतर रॉड में यह सुविधा नहीं होती, इसलिए वह Non-Collapsible माना जाता है।
Q.51 On a technical drawing, the intersection of two axes commonly represents what?
तकनीकी ड्राइंग में दो अक्षों (Axes) का प्रतिच्छेदन सामान्यतः क्या दर्शाता है?
A) The hole diameter / छेद का व्यास B) The material specification / सामग्री का विनिर्देश C) The center point of a part / किसी भाग का केंद्र बिंदु D) The surface finish type / सतह फिनिश का प्रकार
Answer: C) The center point of a part / किसी भाग का केंद्र बिंदु
Description:
The intersection of center lines or axes in an engineering drawing usually indicates the exact center of a circular or symmetrical feature.
हिंदी में:
इंजीनियरिंग ड्राइंग में Center Lines या Axes का प्रतिच्छेदन सामान्यतः किसी वृत्ताकार या सममित भाग के केंद्र बिंदु को दर्शाता है।
Q.52 If spurt holes are blocked, what is the most likely immediate effect on engine operation?
यदि Spurt Holes बंद हो जाएँ, तो इंजन के संचालन पर सबसे संभावित तात्कालिक प्रभाव क्या होगा?
A) Rapid increase in coolant flow to cylinder walls / सिलेंडर दीवारों में कूलेंट प्रवाह तेजी से बढ़ जाएगा B) Increased friction in moving engine components / इंजन के गतिशील भागों में घर्षण बढ़ जाएगा C) Sudden improvement in fuel combustion quality / ईंधन दहन की गुणवत्ता अचानक बेहतर हो जाएगी D) Immediate rise in oil pressure throughout the system / पूरे सिस्टम में तेल का दबाव तुरंत बढ़ जाएगा
Answer: B) Increased friction in moving engine components / इंजन के गतिशील भागों में घर्षण बढ़ जाएगा
Description:
Spurt holes help deliver lubricating oil to moving engine parts. If blocked, lubrication decreases, causing increased friction and wear.
हिंदी में:
Spurt Holes इंजन के चलने वाले भागों तक स्नेहक तेल पहुँचाने का कार्य करते हैं। इनके बंद होने पर Lubrication कम हो जाता है, जिससे घर्षण और घिसाव बढ़ जाता है।
Q.53 Which tool is typically used to tighten fittings on refrigerant hoses?
रेफ्रिजरेंट होज़ की फिटिंग्स को कसने के लिए सामान्यतः किस टूल का उपयोग किया जाता है?
A) Screwdriver or tester / स्क्रूड्राइवर या टेस्टर B) Hammer or mallet / हथौड़ा या मैलेट C) Wrench or spanner / रिंच या स्पैनर D) File or rasp / फाइल या रैस्प
Answer: C) Wrench or spanner / रिंच या स्पैनर
Description:
A wrench or spanner provides the proper grip and torque required to tighten or loosen refrigerant hose fittings safely without damaging them.
हिंदी में:
रेफ्रिजरेंट होज़ की फिटिंग्स को सुरक्षित रूप से कसने या खोलने के लिए रिंच या स्पैनर का उपयोग किया जाता है। यह उचित पकड़ और आवश्यक टॉर्क प्रदान करता है, जिससे फिटिंग्स को नुकसान नहीं पहुँचता।
Q.54 Which engine problem is indicated by high carbon monoxide levels in the exhaust?
एग्जॉस्ट में Carbon Monoxide (CO) का स्तर अधिक होने पर इंजन की कौन-सी समस्या का संकेत मिलता है?
A) Air-fuel mixture is too rich in the engine / इंजन में Air-Fuel Mixture अत्यधिक Rich है B) Poor tire alignment during operation / वाहन के टायरों का गलत Alignment C) Worn spark plugs in the ignition system / इग्निशन सिस्टम में घिसे हुए Spark Plugs D) Low coolant level in the radiator / रेडिएटर में कम Coolant Level
Answer: A) Air-fuel mixture is too rich in the engine / इंजन में Air-Fuel Mixture अत्यधिक Rich है
Description:
High carbon monoxide (CO) emissions usually indicate incomplete combustion caused by an excessively rich air-fuel mixture, where more fuel and less air are supplied to the engine.
हिंदी में:
एग्जॉस्ट में CO का उच्च स्तर सामान्यतः अत्यधिक Rich Air-Fuel Mixture का संकेत देता है। जब इंजन में ईंधन अधिक और हवा कम होती है, तो दहन पूर्ण नहीं होता और Carbon Monoxide बढ़ जाता है।
Q.55 How is the air gap between the brake pads and the disc restored when the brake is released in a floating caliper disc brake?
Floating Caliper Disc Brake में ब्रेक छोड़ने पर Brake Pad और Disc के बीच Air Gap कैसे पुनः स्थापित होता है?
A) By the force of the piston sealing ring / पिस्टन सीलिंग रिंग के बल द्वारा B) By renewed hydraulic pressure / पुनः हाइड्रोलिक दबाव द्वारा C) By the outer brake pad spring / बाहरी ब्रेक पैड स्प्रिंग द्वारा D) By the motion of the locating studs / लोकेटिंग स्टड्स की गति द्वारा
Answer: A) By the force of the piston sealing ring / पिस्टन सीलिंग रिंग के बल द्वारा
Description:
When hydraulic pressure is released, the elastic deformation of the piston sealing ring pulls the piston back slightly, restoring the small clearance between the brake pad and disc.
हिंदी में:
ब्रेक छोड़ने पर पिस्टन सीलिंग रिंग अपनी लचीलापन (Elasticity) के कारण पिस्टन को थोड़ा पीछे खींचती है, जिससे Brake Pad और Disc के बीच आवश्यक Air Gap पुनः बन जाता है।
Q.56 How does a worn-out piston ring influence hydrocarbon emissions in the exhaust?
घिसी हुई Piston Ring एग्जॉस्ट में Hydrocarbon Emissions को कैसे प्रभावित करती है?
A) Improves engine compression / इंजन Compression को बेहतर बनाती है B) Allows unburnt fuel to enter exhaust / अपूर्ण जला हुआ ईंधन एग्जॉस्ट में जाने देती है C) Filters hydrocarbons from exhaust / एग्जॉस्ट से Hydrocarbon को फ़िल्टर करती है D) Reduces emission temperature / उत्सर्जन तापमान कम करती है
Answer: B) Allows unburnt fuel to enter exhaust / अपूर्ण जला हुआ ईंधन एग्जॉस्ट में जाने देती है
Description:
A worn piston ring reduces sealing efficiency, leading to poor combustion and allowing unburnt fuel to pass into the exhaust, increasing hydrocarbon emissions.
हिंदी में:
घिसी हुई Piston Ring सही सीलिंग नहीं कर पाती, जिससे दहन प्रक्रिया प्रभावित होती है और अपूर्ण जला हुआ ईंधन एग्जॉस्ट में पहुँचकर Hydrocarbon Emissions बढ़ा देता है।
Q.57 A vehicle battery repeatedly becomes discharged while driving. Which charging system component is most likely faulty?
यदि वाहन की बैटरी चलते समय बार-बार डिस्चार्ज हो जाती है, तो Charging System का कौन-सा Component सबसे अधिक दोषपूर्ण हो सकता है?
A) Ignition coil producing weak spark during ignition / कमजोर स्पार्क देने वाली Ignition Coil B) Starter motor causing delayed engine cranking / Starter Motor C) Fuel pump reducing fuel supply to the engine / Fuel Pump D) Alternator failing to charge the battery properly / बैटरी को सही प्रकार चार्ज न करने वाला Alternator
Answer: D) Alternator failing to charge the battery properly / बैटरी को सही प्रकार चार्ज न करने वाला Alternator
Description:
The alternator supplies electrical power and charges the battery while the engine is running. If it fails, the battery gradually discharges during driving.
हिंदी में:
इंजन चलने के दौरान Alternator बैटरी को चार्ज करता है। यदि Alternator खराब हो जाए, तो बैटरी लगातार डिस्चार्ज होती रहती है और वाहन की विद्युत प्रणाली प्रभावित होती है।
Q.58 The abbreviation SMF in SMF battery refers to:
SMF Battery में SMF का पूर्ण रूप क्या है?
A) Stored Mechanical Force / स्टोर्ड मैकेनिकल फोर्स B) Sealed Maintenance Free / सील्ड मेंटेनेंस फ्री C) Semi Metallic Frame / सेमी मेटैलिक फ्रेम D) Standard Magnetic Fuse / स्टैंडर्ड मैग्नेटिक फ्यूज
Answer: B) Sealed Maintenance Free / सील्ड मेंटेनेंस फ्री
Description:
SMF batteries are sealed batteries that do not require regular electrolyte maintenance, making them convenient and reliable.
हिंदी में:
SMF का अर्थ Sealed Maintenance Free है। ऐसी बैटरियों में नियमित रूप से पानी या इलेक्ट्रोलाइट भरने की आवश्यकता नहीं होती।
Q.59 Why is it important for the oil cooler to maintain the oil at an optimal temperature range?
Oil Cooler द्वारा इंजन ऑयल को उचित तापमान सीमा में रखना क्यों आवश्यक है?
A) To prevent the oil from changing its color during operation / तेल का रंग बदलने से रोकने के लिए B) To ensure the oil maintains proper viscosity for lubrication / उचित स्नेहन हेतु तेल की सही Viscosity बनाए रखने के लिए C) To cool the combustion gases in the engine cylinders / दहन गैसों को ठंडा करने के लिए D) To increase the oil level in the crankcase automatically / क्रैंककेस में तेल का स्तर बढ़ाने के लिए
Answer: B) To ensure the oil maintains proper viscosity for lubrication / उचित स्नेहन हेतु तेल की सही Viscosity बनाए रखने के लिए
Description:
The oil cooler helps maintain the correct oil temperature so that the oil retains its proper viscosity and provides effective lubrication to engine components.
हिंदी में:
Oil Cooler इंजन ऑयल को उचित तापमान पर बनाए रखता है, जिससे उसकी Viscosity सही रहती है और इंजन के भागों को प्रभावी Lubrication मिलता है।
Q.60 What is indicated if the parking lamp glows continuously in a vehicle with ABS and Electronic Brake-force Distribution (EBD)?
ABS और Electronic Brake-force Distribution (EBD) युक्त वाहन में यदि Parking Lamp लगातार जलती रहे तो यह क्या संकेत देता है?
A) Low brake fluid level / ब्रेक फ्लूइड का स्तर कम है B) Defective EBD operation / EBD प्रणाली में खराबी C) A door is left open / कोई दरवाजा खुला है D) Normal EBD operation / EBD का सामान्य संचालन
Answer: B) Defective EBD operation / EBD प्रणाली में खराबी
Description:
A continuously glowing parking/brake warning lamp in vehicles equipped with ABS and EBD may indicate a malfunction in the EBD system that requires inspection.
हिंदी में:
ABS एवं EBD युक्त वाहनों में Parking/Brake Warning Lamp का लगातार जलना EBD सिस्टम में खराबी का संकेत हो सकता है, जिसकी जाँच आवश्यक है।
Q.61 When the accelerator pedal is fully depressed, what happens during kick-down operation in an automatic transmission?
ऑटोमैटिक ट्रांसमिशन में Accelerator Pedal को पूरी तरह दबाने पर Kick-down Operation के दौरान क्या होता है?
A) A higher gear is selected to save fuel / ईंधन बचाने के लिए उच्च गियर चुना जाता है B) A lower gear is selected to increase acceleration / त्वरण बढ़ाने के लिए निम्न गियर चुना जाता है C) The transmission is disengaged to coast / ट्रांसमिशन को अलग कर दिया जाता है D) The current gear is maintained for stability / वर्तमान गियर को बनाए रखा जाता है
Answer: B) A lower gear is selected to increase acceleration / त्वरण बढ़ाने के लिए निम्न गियर चुना जाता है
Description:
During kick-down, the automatic transmission shifts to a lower gear. This increases engine RPM and provides higher torque for quick acceleration or overtaking.
हिंदी में:
Kick-down के दौरान ऑटोमैटिक ट्रांसमिशन निचले गियर में शिफ्ट हो जाता है। इससे इंजन RPM और टॉर्क बढ़ता है, जिससे वाहन तेजी से गति पकड़ता है।
Q.62 If the secondary winding of an ignition coil has an open circuit or poor ground connection, what is the most likely effect?
यदि Ignition Coil की Secondary Winding में Open Circuit या खराब Ground Connection हो, तो सबसे संभावित प्रभाव क्या होगा?
A) The high voltage spark will not be generated efficiently / उच्च वोल्टेज स्पार्क प्रभावी रूप से उत्पन्न नहीं होगा B) Engine will misfire / इंजन मिसफायर करेगा C) The high voltage spark will be generated efficiently / उच्च वोल्टेज स्पार्क प्रभावी रूप से उत्पन्न होगा D) The primary winding voltage will increase / प्राइमरी वाइंडिंग का वोल्टेज बढ़ जाएगा
Answer: A) The high voltage spark will not be generated efficiently / उच्च वोल्टेज स्पार्क प्रभावी रूप से उत्पन्न नहीं होगा
Description:
An open secondary winding or poor grounding interrupts the high-voltage circuit, preventing proper spark generation at the spark plug.
हिंदी में:
Secondary Winding में Open Circuit या खराब Ground होने पर High Voltage Circuit पूरा नहीं हो पाता, जिससे Spark Plug पर उचित स्पार्क उत्पन्न नहीं होता।
Q.63 Why is it important for the thermostat to begin opening at a specific temperature during engine operation?
इंजन संचालन के दौरान Thermostat का एक निश्चित तापमान पर खुलना क्यों आवश्यक है?
A) Ensures engine reaches and maintains optimal temperature / इंजन को उचित कार्य तापमान तक पहुँचाने और बनाए रखने के लिए B) Closes only when temperature exceeds safe limit / यह केवल तापमान बढ़ने पर बंद होता है C) Permits random coolant flow regardless of heat / तापमान की परवाह किए बिना कूलेंट प्रवाह की अनुमति देता है D) Allows thermostat to remain fully open at all times / थर्मोस्टेट को हमेशा पूरी तरह खुला रखता है
Answer: A) Ensures engine reaches and maintains optimal temperature / इंजन को उचित कार्य तापमान तक पहुँचाने और बनाए रखने के लिए
Description:
The thermostat regulates coolant flow to help the engine warm up quickly and maintain its ideal operating temperature.
हिंदी में:
Thermostat कूलेंट के प्रवाह को नियंत्रित करता है ताकि इंजन जल्दी से अपने आदर्श कार्य तापमान तक पहुँच सके और उसे बनाए रख सके।
Q.64 Which of the following is a sign of a faulty starter solenoid?
निम्नलिखित में से कौन-सा Faulty Starter Solenoid का संकेत है?
A) Engine cranks faster than normal / इंजन सामान्य से तेज क्रैंक करता है B) Strong fuel smell during ignition / स्टार्ट करते समय तेज ईंधन की गंध आती है C) Clicking sound but engine does not turn over / क्लिक की आवाज आती है लेकिन इंजन क्रैंक नहीं होता D) Dashboard lights are brighter than normal / डैशबोर्ड लाइट सामान्य से अधिक चमकती है
Answer: C) Clicking sound but engine does not turn over / क्लिक की आवाज आती है लेकिन इंजन क्रैंक नहीं होता
Description:
A defective starter solenoid often produces a clicking sound because the solenoid engages but cannot supply sufficient current to rotate the starter motor.
हिंदी में:
खराब Starter Solenoid में अक्सर क्लिक की आवाज सुनाई देती है, लेकिन Starter Motor इंजन को घुमा नहीं पाती।
Q.65 Which part of the rack and pinion steering system is responsible for moving the rack?
Rack and Pinion Steering System में Rack को चलाने के लिए कौन-सा भाग जिम्मेदार होता है?
A) The steering wheel / स्टीयरिंग व्हील B) The wheels / पहिए C) The track-rod / ट्रैक रॉड D) The pinion / पिनियन
Answer: D) The pinion / पिनियन
Description:
The pinion gear rotates with steering input and converts rotary motion into linear movement of the rack.
हिंदी में:
Pinion Gear स्टीयरिंग इनपुट के साथ घूमता है और घूर्णन गति को Rack की सीधी गति में बदल देता है।
Q.66 If two vehicles have the same motor but one carries more passengers, which will need higher tractive effort on the same road?
यदि दो वाहनों में समान मोटर हो लेकिन एक वाहन अधिक यात्रियों को ले जा रहा हो, तो समान सड़क पर किसे अधिक Tractive Effort की आवश्यकता होगी?
A) Vehicle with different tyre tread pattern / अलग टायर ट्रेड वाला वाहन B) Vehicle with newer battery brand / नई बैटरी वाला वाहन C) Vehicle with brighter paint color / चमकीले रंग वाला वाहन D) Vehicle with more passengers / अधिक यात्रियों वाला वाहन
Answer: D) Vehicle with more passengers / अधिक यात्रियों वाला वाहन
Description:
A heavier vehicle requires greater tractive effort to overcome inertia and rolling resistance.
हिंदी में:
अधिक यात्रियों के कारण वाहन का कुल भार बढ़ जाता है, इसलिए उसे चलाने के लिए अधिक Tractive Effort की आवश्यकता होती है।
Q.67 To improve both engine efficiency and emission control in a diesel engine, which piston ring function must be prioritized during maintenance?
डीजल इंजन में Engine Efficiency और Emission Control दोनों को बेहतर बनाने के लिए Maintenance के दौरान Piston Ring की किस कार्यक्षमता को प्राथमिकता दी जानी चाहिए?
A) Maintaining piston lubrication and cooling efficiency / पिस्टन की स्नेहन एवं शीतलन क्षमता बनाए रखना B) Improving piston alignment and minimizing noise / पिस्टन का संरेखण सुधारना और शोर कम करना C) Ensuring proper sealing of combustion gases and oil regulation / दहन गैसों की उचित सीलिंग तथा तेल नियंत्रण सुनिश्चित करना D) Increasing piston speed and reducing heat buildup / पिस्टन की गति बढ़ाना और ऊष्मा कम करना
Answer: C) Ensuring proper sealing of combustion gases and oil regulation / दहन गैसों की उचित सीलिंग तथा तेल नियंत्रण सुनिश्चित करना
Description:
Proper piston ring sealing maintains compression, prevents blow-by gases, controls oil consumption, improves efficiency, and reduces emissions.
हिंदी में:
Piston Ring की सही सीलिंग Compression बनाए रखती है, Blow-by को रोकती है, Oil Consumption नियंत्रित करती है तथा इंजन की दक्षता और उत्सर्जन नियंत्रण दोनों में सुधार करती है।
Q.68 Which part connects the electric motor to the wheels in an electric vehicle?
इलेक्ट्रिक वाहन (EV) में Electric Motor को Wheels से जोड़ने वाला भाग कौन-सा है?
A) Air conditioning unit / एयर कंडीशनिंग यूनिट B) Transmission system / ट्रांसमिशन सिस्टम C) Tail light / टेल लाइट D) Display panel / डिस्प्ले पैनल
Answer: B) Transmission system / ट्रांसमिशन सिस्टम
Description:
The transmission system transfers power from the electric motor to the wheels, enabling vehicle movement efficiently.
हिंदी में:
Transmission System इलेक्ट्रिक मोटर से उत्पन्न शक्ति को पहियों तक पहुँचाता है, जिससे वाहन चल पाता है।
Q.69 Which part of a composite headlight is most likely to be made from plastic rather than glass?
Composite Headlight का कौन-सा भाग Glass के बजाय Plastic से बना होने की सबसे अधिक संभावना रखता है?
A) Reflector / रिफ्लेक्टर B) Bulb / बल्ब C) Holder / होल्डर D) Lens / लेंस
Answer: D) Lens / लेंस
Description:
Modern composite headlights commonly use polycarbonate plastic lenses because they are lightweight, impact-resistant, and easy to shape.
हिंदी में:
आधुनिक Composite Headlights में Polycarbonate Plastic Lens का उपयोग किया जाता है क्योंकि यह हल्का, मजबूत और झटकों के प्रति अधिक प्रतिरोधी होता है।
Q.70 In a workshop calculation, you need to find the side of a square base with an area of 64 cm². What is the correct length?
यदि किसी वर्गाकार आधार (Square Base) का क्षेत्रफल 64 cm² है, तो उसकी भुजा की लंबाई कितनी होगी?
A) The side of the base is 8 cm / आधार की भुजा 8 सेमी है B) The side of the base is 6 cm / आधार की भुजा 6 सेमी है C) The side of the base is 7 cm / आधार की भुजा 7 सेमी है D) The side of the base is 9 cm / आधार की भुजा 9 सेमी है
Answer: A) The side of the base is 8 cm / आधार की भुजा 8 सेमी है
Description:
Area of a square = Side². Therefore, Side = √64 = 8 cm.
हिंदी में:
वर्ग का क्षेत्रफल = भुजा² होता है। अतः भुजा = √64 = 8 सेमी।
Q.71 When adjusting the speed of a drilling machine, what is generally decreased for harder materials?
कठोर (Harder) सामग्री पर ड्रिलिंग करते समय सामान्यतः किसे कम किया जाता है?
A) The feed rate of the material / फीड रेट B) The depth of the hole drilled / छेद की गहराई C) The rotational speed of the drill / ड्रिल की घूर्णन गति D) The length of the drill tool / ड्रिल टूल की लंबाई
Answer: C) The rotational speed of the drill / ड्रिल की घूर्णन गति
Description:
Hard materials require lower drilling speeds to reduce heat generation and prevent tool wear.
हिंदी में:
कठोर सामग्री की ड्रिलिंग के लिए ड्रिल की गति कम रखी जाती है ताकि अधिक गर्मी उत्पन्न न हो और टूल की घिसाई कम हो।
Q.72 Which type of vehicle commonly uses Liquefied Petroleum Gas (LPG) as its primary fuel source?
निम्नलिखित में से कौन-सा वाहन सामान्यतः LPG को अपने मुख्य ईंधन के रूप में उपयोग करता है?
A) Heavy trucks / भारी ट्रक B) City taxis / शहर की टैक्सियाँ C) High-performance sports cars / स्पोर्ट्स कारें D) Agricultural tractors / कृषि ट्रैक्टर
Answer: B) City taxis / शहर की टैक्सियाँ
Description:
LPG is widely used in taxis due to its lower operating cost and reduced emissions compared to conventional fuels.
हिंदी में:
LPG का उपयोग शहरों की टैक्सियों में अधिक किया जाता है क्योंकि यह अपेक्षाकृत सस्ता और कम प्रदूषणकारी ईंधन है।
Q.73 A technician lifts a box using a hoist. What type of energy is primarily involved in lifting?
एक तकनीशियन Hoist की सहायता से एक बॉक्स उठाता है। इस प्रक्रिया में मुख्यतः कौन-सी ऊर्जा शामिल होती है?
A) Chemical energy / रासायनिक ऊर्जा B) Electrical energy / विद्युत ऊर्जा C) Potential energy / स्थितिज ऊर्जा D) Kinetic energy / गतिज ऊर्जा
Answer: C) Potential energy / स्थितिज ऊर्जा
Description:
When an object is lifted, its height increases and energy is stored as gravitational potential energy.
हिंदी में:
किसी वस्तु को ऊपर उठाने पर उसकी ऊँचाई बढ़ती है और उसमें गुरुत्वीय स्थितिज ऊर्जा (Potential Energy) संचित हो जाती है।
Q.74 Which unit assists the clutch in performing gear shifts in automatic transmissions?
ऑटोमैटिक ट्रांसमिशन में Gear Shift के दौरान Clutch की सहायता कौन-सी यूनिट करती है?
A) Planetary gear sets / प्लैनेटरी गियर सेट B) Steering column linkage / स्टीयरिंग कॉलम लिंकिज C) Brake pad system / ब्रेक पैड सिस्टम D) Torque converter assembly / टॉर्क कन्वर्टर असेंबली
Description:
The torque converter transmits engine power smoothly and assists gear shifting in automatic transmission systems.
हिंदी में:
Torque Converter इंजन की शक्ति को ट्रांसमिशन तक सुचारू रूप से पहुँचाता है तथा ऑटोमैटिक गियर शिफ्टिंग में सहायता करता है।
Q.75 A ballast resistor is used in a circuit to:
किसी विद्युत परिपथ में Ballast Resistor का उपयोग किस उद्देश्य से किया जाता है?
A) Limit circuit current to a safe value / परिपथ धारा को सुरक्षित स्तर तक सीमित करना B) Convert AC into DC / AC को DC में बदलना C) Increase supply voltage / सप्लाई वोल्टेज बढ़ाना D) Store electrical energy / विद्युत ऊर्जा संग्रहित करना
Answer: A) Limit circuit current to a safe value / परिपथ धारा को सुरक्षित स्तर तक सीमित करना
Description:
A ballast resistor limits current flow in a circuit and protects components from excessive current.
हिंदी में:
Ballast Resistor परिपथ में धारा को नियंत्रित और सीमित करता है, जिससे उपकरण अधिक धारा से सुरक्षित रहते हैं।
FAQ
Q1. RRB ALP CBT2 PART-B qualified required in final merit?
Answer-
No, the RRB ALP CBT2 Part B (the iti trade test) is not included in the
final merit list calculation. It is a qualifying section, meaning
candidates must score the minimum qualifying marks (35% or 27 marks out
of 75) to pass, but the marks obtained in Part B are not used to
determine the final merit. The final merit is based on the performance
in Part A of CBT2 and the CBAT (Computer Based Aptitude Test).
Q2. where rrb alp cbt2 part-b mcq questions and answers available?
Answer- Candidates can download rrb
alp cbt2 part-b question paper after Response key has been published.
also available many website or Paid version E-BOOK & PDF with
solution Candidates can download railway life pdf E-book for better under stand from this Link click here
Q3- Mechanic Motor Vehicle mechanic iti trade is under which group of ALP exam?
Answer
- Mechanic Motor Vehiclemechanic iti trade Group is mechanical and Automobile and Allied Trade industrial training institution is full form name of ITI. .
No comments:
Post a Comment
1. I am a student preparing for railway exams. Railway Life website is very useful and informative. It helps me understand railway working and careers. Please add more exam-related study materials. Thank you.
2. Please add a separate section for railway exam preparation with syllabus details, important topics, and daily current affairs related to railways.
3. I am a railway exam student and I find Railway Life very informative. The articles are easy to understand and useful for competitive exams. Thank you for providing such valuable content.
4. This website helps railway exam aspirants understand the working life of Indian Railways. Kindly include practice questions, mock tests, and previous year railway exam questions.
5. Please include category-wise and zone-wise cut-off details.
6. am a railway exam aspirant. The cut-off analysis on Railway Life website is very useful for students. It helps in understanding previous year trends and planning preparation. Kindly add category-wise and zone-wise cut-off details. Thank you.
7. Railway Life website provides useful cut-off analysis for railway exams. It helps students understand exam trends. More detailed cut-off data will be helpful.
8. The cut-off analysis on Railway Life website is helpful for railway exam aspirants to understand exam trends.
No comments:
Post a Comment
1. I am a student preparing for railway exams. Railway Life website is very useful and informative. It helps me understand railway working and careers. Please add more exam-related study materials. Thank you.
2. Please add a separate section for railway exam preparation with syllabus details, important topics, and daily current affairs related to railways.
3. I am a railway exam student and I find Railway Life very informative. The articles are easy to understand and useful for competitive exams. Thank you for providing such valuable content.
4. This website helps railway exam aspirants understand the working life of Indian Railways. Kindly include practice questions, mock tests, and previous year railway exam questions.
5. Please include category-wise and zone-wise cut-off details.
6. am a railway exam aspirant. The cut-off analysis on Railway Life website is very useful for students. It helps in understanding previous year trends and planning preparation. Kindly add category-wise and zone-wise cut-off details. Thank you.
7. Railway Life website provides useful cut-off analysis for railway exams. It helps students understand exam trends. More detailed cut-off data will be helpful.
8. The cut-off analysis on Railway Life website is helpful for railway exam aspirants to understand exam trends.