HINDI / ENGLISH

Sunday 8 September 2019

Format of railway joining letter original pdf such as Attestation Form, identity certificate, Character certificate and bond of Indemnity

Railway Format Required at time of joining for different post such as Group d (Level-1), RRB NTPC  (Graduate and Under graduate post), rrb alp technician and rrb junior engineer posts.

Link here  👉 https://Railway format for Joining such as Attestation Form,identity certificate, Character certificate and bond of Indemnity etc.
 
RRB NTPC 2019 JONING LETTER'S for Station Master post in 2022. For Railway joining letter pdf 2022 and railway joining letter format download from below link.
Railway new joining letter pdf 2022 CLICK HERE FILLED FORM
 
Table of Contents  
 
i) Job offer letter / Joining letter. (नौकरी प्रस्ताव पत्र / ज्वाइनिंग लेटर)
ii) Attestation Form (सत्यापन प्रपत्र).
iii) identity certificate पहचान प्रमाण पत्र.
iv) Character certificate चरित्र प्रमाण पत्र.
v) Declaration by student छात्र द्वारा घोषणा.
vi) Declaration by Family परिवार द्वारा घोषणा.
vii) Bank Details with crossed cheque for salary वेतन के लिए रेखांकित चेक के साथ बैंक विवरण.
viii) Notarized Declaration with adhesive stamp चिपकने वाली मुहर के साथ नोटरीकृत घोषणा.
ix) NPS Details / NPS Applications एनपीएस विवरण / एनपीएस एप्लीकेशन
x) OBC/EWS/SC/ST certificate if required यदि आवश्यक हो तो ओबीसी / ईडब्ल्यूएस / एससी / एसटी प्रमाण पत्र. 
  
 👉 Job offer letter / Joining letter:-  
 
Joining letter issue to candidates after successfully completed all stage for recruitment's process i.e. CBT exam, CBAT, Typing skill test (TST), Documents verification and medical examination as per mentioned in notified vacancy minimum requirements.   
 
 
👉Attestation Form :-
 
 Attestation Form Required to complete fill by candidates with Self details and family details including following details.
 i) Full Name including surname as per 10th Mark sheet (Example Railway Life Alp ).
 ii) Present address / contact address including house number/flat number, gali number, post office, police station, Districts and State with pin code.
iii) Permanent address including house number/flat number, gali number, post office, police station, Districts and State with pin code.
iv) Father Full Name & details including surname as per 10th Mark sheet shown.
v) Candidates Educational qualification as per notification and mentioned in online form filling.
vi) Previous job details if applicable.
vii) police case such as criminal nature shall be recorded in local police station.
viii) Name and address of  Two responsible persons in your locality or two reference to whom you are known. (use during police verification by local police with signature of responsible persons on your verification letter.)
 
 
👉identity certificate :-  This certificate issued by following officers or certificate to be signed by any of the following -
i) Gazetted officer of state or central governments.
ii) member of parliaments or state legislature. 
iii) sub-divisional magistrate/officers.
iv) Tehsildars / Sub-Tehsildars.
v) principals and Head masters.
vi) Block development officers (BDO).
vii) Post Masters.
viii) Punchayat inspectors. etc.   
 
👉Character certificate :-  
 
Character certificate is two types, i) for Group-C & D both post will be use as FORMAT -A as non sensitive service. ii) for Group- D both post will be use as FORMAT -B  as non sensitive service.
Character certificate will be obtained from last study of students with Principle/ head master / head of institute signature and stamp. and Character certificate duly signed by Executive Magistrate / District  Magistrate (DM) or Sub-Divisional Magistrate.
 
👉Declaration by student:- 
  
Declaration by student has been submitted as per given format with Two Railways employees signature whom you are known. some times Railway not demands this types of format because every students not able to complete two working railway employee signature.
 
vi) Declaration by Family.
 

FAQ

 
1. How to downloads Railways Joining letter for practice of filling details?
 
Answer - You may be CLICK HERE for sample unfilled is download in English and hindi.
Also RRB / RRC Wise Format may be download from below link's 
 
i) RRC / RRB Bilaspur (Zone SECR) Attestation Form, identity certificate, Character certificate and Service bond of Indemnity etc [CLICK HERE for PDF]
 
ii) RRC / RRB New delhi (Zone - NR) Attestation Form, identity certificate, Character certificate and Service bond of Indemnity etc [CLICK HERE for PDF]
 
iii) RRC / RRB Hajipur (Zone - ECR) Attestation Form (GV-1), identity certificate, Character certificate and Service bond of Indemnity etc [CLICK HERE for PDF] 
 
iv) RRC / RRB Kolkata (Zone - ER) Attestation Form (GV-1), identity certificate, Character certificate and Service bond of Indemnity etc [CLICK HERE for PDF] 
 
v) RRC / RRB Bhubaneswar (Zone - ECoR) Attestation Form (GV-1), identity certificate, Character certificate and Service bond of Indemnity etc [CLICK HERE for PDF] 
 
vi) RRC / RRB Guwahati (Zone - NFR) Attestation Form (GV-1), identity certificate, Character certificate and Service bond of Indemnity etc [CLICK HERE for PDF] 
 
vii) RRC / RRB Pryagraj / Allahabad (Zone - NCR) Attestation Form (GV-1), identity certificate, Character certificate and Service bond of Indemnity for mew Joining etc [CLICK HERE for PDF]
 
viii) RRC / RRB Secunderabad (Zone - SCR) Attestation Form (GV-1), identity certificate, Character certificate and Service bond of Indemnity for mew Joining etc [CLICK HERE for PDF] 
 
ix) RRC / RRB Mumbai (Zone - CR) Attestation Form (GV-1), identity certificate, Character certificate and Service bond of Indemnity for mew Joining etc [CLICK HERE for PDF]  
 
x) RRC / RRB Bhopal / Jabalpur (Zone - WCR) Attestation Form (GV-1), identity certificate, Character certificate and Service bond of Indemnity for mew Joining etc [CLICK HERE for PDF] [CLICK HERE for Group d Joining PDF]              

Friday 23 August 2019


 hello friends.
 Microprocessor and Micro-controller  important topic for every examination question. here discuss 35 mcq type question from it and there answer in marked BOLD option 



hint:- answer in bold latter 



01 What is mean by ALU

 Arithmetic logic upgrade
 Arithmetic logic unsigned
 Arithmetic local unsigned
 Arithmetic logic unit





02 which of the following lists the interrupt in decreasing order of priority?

 TRAP, RST 5.5, RST 6.5, RST 7.5, INTR
 INTR, TRAP, RST 7.5, RST 6.5, RST 5.5
 TRAP, RST 7.5, RST 6.5, RST 5.5, INTR
 RST 7.5, RST 6.5, RST 5.5, TRAP, INTR






03 Which of the following interrupt is only edge sensitive?

 RST 7.5
 TRAP
 RST6.5
 RST 5.5




04 Maximum number of I/O that can be addressed by the INTEL 8085 is
 65536
 285
 512
 256






05 The microprocessor may be made to exit from HALT state by asserting
 RESTART
 any of the five interrupt lines
 READY line
 A or B or HOLD line




6. The data lines of 8085 microprocessor are multiplexed with
 higher order address lines
 lower order address lines
 status lines
 none of the above




7.  The content of the A15-A8 (higher order address lines) while executing “IN 8-bit port address” instruction are
 same as the content of A7-A0
 irrelevant
 all bits reset (i.e. 00H)
 all bits set (i.e. FFH )




8 Which one of the following ICs is used to interface keyboard and display?
 8251
 8279
 8259
 8253





9.  The execution of RST n instruction causes the stack pointer to
 increment by two
 decrement by two
 remain unaffected
 none of the above



 10.  The stack is nothing but a set of
 reserved ROM address space
 reserved RAM address space
 reserved I/O address space
 none of the above





11 . S0 and S1 pins are used for
 serial communication
 indicating the processor’s status
 acknowledging the interrupt
 none of the above




12 Identify the programmable DMA controller number from the following

 8257
 8253
 8251
 8279



13. Identify  the programmable interrupt controller from the following
 8279
 8259
 8257
 8275






14. Identify the non-programmable interfacing device from the following
 8295.
 8257.
 8212.
 8255.




 15. In a vector interrupt
 the branch address is assigned to a fixed location in memory.
 the interrupting source supplies the branch information to the processor through an interrupt vector.
 the branch address is obtained from a register in the processor.
 none.




16. The process to file transfer from internet to computer.


 Uploading
 Downloading
 Browsing
Searching



17 what is address given to computer connected to network are known.
 System address
 SISID
 PROCESS ID
 IP address





 18. ..................... is process to finding errors in software code.
 Compiling
 Assembling
 Interpreting
Debugging




19.  Identify the programmable interval timer from the following
 8252
 8253
 8279
 8275




20. 8085 microprocessor has how many pins
  30.
 39.
 40.
 41.

hint 27 output pin




21.  the computer code of interchange information between terminal
  ASCII
  BCD
  BCDIC
 HOLLERITH






22. In 8085 name/names of the 16 bit registers is/are
 Stack pointer.
 Program counter.
 Both A and B.
 None of these


23. The ROM programmed during manufacturing process itself is called
 MROM
 PROM
 EPROM
 EEPROM





24. WHAT ARE .bas .doc and .html  example of ..
 Extension
 domen
 Database
 Protocol





25. What is the name of software that allows to us through web pages called?

 Browser
 Mail client
 FTP client
 Messenger





26. Which is not An operating system.
DOS
 Oracle
 Lunix
 Windows




27. in an intel 8085A microprocessor, why is READY signal used ?
 To indicate to user that the microprocessor is working and is ready for use.
 To provide proper Wait states when the microprocessor is communicating with a slow peripheral device.
 To slow down a fast peripheral device so as to communicate at the microprocessor’s device.
 None of the above.






28.  ALU (Arithmetic and Logic Unit) of 8085 microprocessor consists of
 Accumulator, temporary register, arithmetic and logic circuits
 Accumulator, arithmetic, logic circuits and five flags
 Accumulator, arithmetic and logic circuits
 Accumulator, temporary register, arithmetic, logic circuits and five flags





29.  The clock speed of 8085 is
 1 MHz
 2 KHz.
 3.2 KHz.
 3.2 MHz



 30. The first machine cycle of an instruction is always
 A memory read cycle
 A fetch cycle
 An I/O read cycle
 A memory writes cycle




31.  The correct sequence of steps in the instruction cycle of a basic computer is
 Fetch, Execute, Decode and Read effective address.
 Read effective address, Decode, Fetch and Execute.
 Fetch, Decode, Read effective address and, Execute.
 Fetch, Read effective address, Decode and Execute.





32.    Ready pin of microprocessor is used
 To indicate that microprocessor is ready to receive inputs
 To indicate that microprocessor is ready to receive outputs
 To introduce wait state
 To provide direct memory access




33.   A high on RESET OUT signifies that
 All the registers of the CPU are being reset
 All the registers and counters are being reset
 All the registers and counters are being reset and this signal can be used to reset external support chip
 Processing can begin when this signal goes hig




34.   Temporary registers in 8085 are
 B and C.
 D and E.
 H and L.
 W and Z.




35.   Register pair used to indicate memory
 B and C
 D and E
 H and L
 W and Z